Products
Products
RS-232 Transceiver RS-232 transceivers are typically used as an interface between the controller circuitry (CPU, MCU, DSP, FPGA, etc.) and the RS232 bus.
74LVC1G07DBVR IC BUFF/DRVR W/OD OUT SOT-23-5 The 74LVC1G07 provides the non-inverting buffer. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
LM1881 Video Sync Separator SOP-8 TheLM1881Video sync separator extract stiming information including composite and vertical sync,burst/back porch timing,and odd/even field information from standard negative going sync NTSC,PAL*and SECAM video signals with amplitude from 0.5Vto2Vp-p.The integrated circuit is also capable of providing sync separation for non-standard,faster horizontal rate video signals. The vertical output is produced on the rising edge of the first serration in the vertical sync period. A default vertical output is produced after a time delay if the rising edge mentioned above does not occur within the externally set delay period,such as might be the case for a non-standard video signal.
SL232E RS232 Transceiver SOP-16 UCC(V)(UCC(V)):4.5V ICC(mA)(ICC(mA)):14mA SR(V/us) (SR(V/us)):-- Package(Package):SOP-16
SL3232E RS232 Transceiver SOP-16 UCC(V)(UCC(V)):3V ICC(mA)(ICC(mA)):-- SR(V/us) (SR(V/us)):-- Package(Package):SOP-16
SL3232EESE RS232 Transceiver SOP-16 SL 3232E is a 3.0V to 5.5V power-supply, dual-channel, high ESD-protected, low-power RS-232 transceiver that fully meets the requirements of the TIA/EIA-232 standard.SL 3232E includes two drives and two receivers, with enhanced ESD protection function, reaching the protection capacity of HBM above 15kV and 8kV IEC-4100-4-2 contact discharge. When powered, the charge pump only needs four 0.1μF external capacitors to achieve a rate of 96kbps error-free data transmission. Each driver and receiver can be used independently.
whatsapp

Service Hotline

tel: +86 755 83044319

WhatsApp

Whatsapp:+8618073002950