+86 755-83044319

Events

/
  • Updated: 2022-03-17
  • Views: 7879
How to judge the quality of the IGBT drive board? The detection of the driver board is usually the drive board and the motherboard and the main circuit, that is, the driver IC is powered by the power supply, of course, the drive circuit can be repaired separately; the quality of the drive board can be detected without ……
  • Updated: 2022-03-17
  • Views: 8500
Which of the diodes, triode and field effect pipes cause permanent damage after breakdown? The breakdown of PN knots can be divided into avalanche breakdown, tunnel breakdown and thermal piercing. The first two generally have no destructiveness. If the reverse voltage decreases immediately, the performance of the PN kn……
  • Updated: 2022-03-17
  • Views: 8321
What are the characteristics of patch LED? Patch LEDs are mainly used in lighting systems, decoration, electronic devices indicators, backlight, display and instruments and other fields. So what are the characteristics of patch LED? (1) The principle of luminous light belongs to the cold hair, instead of heating or dis……
  • Updated: 2022-03-17
  • Views: 7904
Patch LED's precautions Patch LED, also called patch -type LED, is a simple light. Its light emitting principle is that the current is over -the -LE semiconductor, and excess energy will be released through the combination of electron and holes in the form of light to achieve the lighting effect. 1. Clean, do not use u……
  • Updated: 2022-03-17
  • Views: 8933
What are the applications in the principle of diode? As we all know, the diode has the characteristics of unidirectional dynamics and can be applied to these fields: 1. Rectifiers and rectifier diode are mainly used for rectifier circuits, that is, converting AC power to DC, the pulsating rectifier diode Its operating ……
  • Updated: 2022-03-17
  • Views: 7976
The principle of diode and introduction of the principle of diodes is that when the forward voltage bias is generated, the external electrical field and the self -built electric field are mutually suppressing and eliminated, increasing the diffusion current of the carrier, causing positive current, thereby conducting e……
  • Updated: 2022-03-17
  • Views: 7938
The use of diode is used in parallel and half of the two -pole two diodes of each two -pole circuit, each of which is connected by one -third of the total current of the circuit. In short, there are several diode parallel, "the current flowing through each diode is equal to one -third of the total current. However It w……
  • Updated: 2022-03-17
  • Views: 7001
The indicator light of electronic products. 1. As long as the circuit is connected to 220V/50Hz AC power cord, the LED will light up, indicating that the power supply is connected. The resistance value of the current limit resistance R is 220V/if. 2. AC switch indicator Lights incandescent lamp switch indicator light c……
  • Updated: 2022-03-17
  • Views: 7787
What is the diodes of the patch? It is an electronic device with one -way conduction current. There is a PN knot and two lead terminals in the semiconductor diode. This electronic device is converted in one -way current according to the direction of applying voltage. Generally speaking, the diode of the patch is a P-N ……
  • Updated: 2022-03-17
  • Views: 8182
The working principle of the field effect tube field effect tube is a field effect transistor. A small number of thermal conductors of the carrier are also called multi -polar crystalline tube. It belongs to the pressure control semi -ultra -conductor parts. It has the advantages of high output resistance (10^8 ~ 10^9Ω……
  • Updated: 2022-03-17
  • Views: 8137
Is there any difference between field effect tube and MOS tube? The field effect tube is generally divided into MOS field effect tube and knot field effect tube. At present, the MOS field effect tube is mainly used, commonly known as MOS tube. MOS is the abbreviation of metal-oxide-semiconductor, that is, grid-silicon-……
  • Updated: 2022-03-17
  • Views: 8926
What is the role of the triode? Product quality inspection: (1) Measure polar resistance. Put the multimeter in R \\u0026 Times; 100 or R \\u0026 Times; 1K, and test it according to the six different connections of the two tablets of red and black. Among them, the positive resistance value of the transmitted knotted an……

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat