+86 755-83044319

Technical Blogs

/
  • Updated: 2022-12-07
  • Views: 7992
In China, cars are basically standardized products when they leave the factory. In order to meet the personalized and diversified needs of car owners, there is a huge "car aftermarket", namely 4S stores, maintenance stations, and modification plants, where automobile enthusiasts can modify or add some products into the……
  • Updated: 2022-12-06
  • Views: 11192
Its main function is current amplification (analog circuit) and switching action (digital circuit).
  • Updated: 2022-12-01
  • Views: 9410
No matter how the TV is generated here, such as direct or indirect lightning strikes, electrostatic discharge, large-capacity load switching and other factors cause surges. The voltage ranges from a few volts to tens of kilovolts or even higher.
  • Updated: 2022-11-26
  • Views: 10855
The advantages of TVS tubes: 1. The response speed is extremely fast (Ps level); 2. The breakdown voltage ranges from 6.12V to 550V; 3. The clamping voltage is more accurate.
  • Updated: 2022-11-18
  • Views: 11251
The TVS tube is a high-efficiency protection device. When the two ends are subjected to an instantaneous high-energy impact, the TVS tube can instantly convert its high-resistance characteristics into low-resistance characteristics, absorb large currents, and clamp the voltage at both ends of the TVS tube. At a certain……
  • Updated: 2022-11-17
  • Views: 8263
ESD electrostatic protector is an overvoltage, anti-static protection component, used to protect sensitive circuits in electronic equipment from the influence of ESD (electrostatic discharge), asThe purpose is to transfer the ESD stress from the sensitive component, so that the current flows through the protective comp……
  • Updated: 2022-11-12
  • Views: 9847
1. Regarding the relationship between the peak value of absorbed power of transient voltage and the pulse width of transient voltage, the manual only gives the ……
  • Updated: 2022-11-09
  • Views: 9921
1. What is a fast recovery diode Fast recovery diodes are commonly used in higher frequency rectification and freewheeling products. Generally used for the i……
  • Updated: 2022-11-09
  • Views: 9315
TVS Diodes vs Zener Diodes: Compared to traditional Zener diodes, TVS TVS diodes have a larger P/N junction area. This structural improvement allows TVS to have stronger high voltage withstand capability while reducing voltage cut-off rate, so it has a be
  • Updated: 2022-04-20
  • Views: 9631
We know that when the sub -modules of the circuit system are transferred to data exchange, there may be some problems that cause the signal to "circulate" the signal that the signal cannot be normal and high quality. The types of their respective signals are inconsistent (such as sensor detection signal), etc. At this ……
  • Updated: 2022-04-20
  • Views: 8502
Today I said a voltage PWM controller, which is the LM5025 chip. Let's take a look at its basic parameters. Basic features: The chip built -in startup bias regulator, which has a programmable low -voltage lock output function (UVLO), voltage drive, 5V reference voltage, programmable soft startup function, and heat -cut……
  • Updated: 2022-04-20
  • Views: 9059
The full name of TVS is Transient Voltage Suppressor, a transient voltage suppressor, which is a protective device. The tvs tube also belongs to the diode, but the characteristics are different from the diode. Its working principle is similar to the stabilization diode. It also uses reverse breakdown stable voltage. Wh……

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat