1. Product Overview
SL1703Tx is a low-power, omnipolar detection, medium-speed response Hall switch sensor in SOT-23-3L SMD package, designed for battery-powered and miniaturized smart devices. It features wide voltage range, wide operating temperature range and high anti-interference performance, suitable for medium-speed sensing, position detection, flip wake-up and other applications.
2. Key Parameters
Sensing Polarity: Omnipolar (triggered by both N and S poles)
Operating Voltage: 1.8V–5.5V
Operating Current: 2.4μA @1.8V (100Hz)
Sampling Frequency: 100Hz
Magnetic Threshold: 36Gs (low threshold)
Output Type: CMOS push-pull output
Package: SOT-23-3L
Operating Temperature: -40℃~+125℃
ESD: HBM 8KV
3. Product Advantages
Medium-speed response and sensitive sensing
The 100Hz sampling frequency captures magnetic field changes in a timely manner, ideal for general-speed detection scenarios.
Omnipolar triggering for easier mounting
It does not distinguish between N and S poles; triggering occurs when either magnetic pole approaches, reducing structural and assembly costs.
Microampere-level ultra-low power consumption
The average current is only 2.4μA, and the sleep current is as low as 0.4μA, enabling long standby time for battery-powered devices.
Wide voltage and temperature range with high reliability
1.8V–5.5V wide voltage compatibility for lithium batteries and MCUs; industrial-grade wide temperature range of -40℃~125℃ and 8KV ESD deliver outstanding stability.
Compact size for easy SMD mounting
The ultra-small SOT-23-3L package fits high-density PCBs and supports automated production.
Stable output with minimal external components
CMOS push-pull output eliminates the need for an external pull-up resistor; stable operation can be achieved with just one 1μF filter capacitor.
4. Product Features
Omnipolar magnetic field detection, responsive to approach of either N or S pole
100Hz sampling frequency for medium-speed response
Low magnetic threshold of 36Gs with high sensitivity to weak magnetic signals
Built-in temperature compensation and clock logic for stable threshold without drift
Intermittent sleep operating mode with excellent power consumption performance
CMOS push-pull output with clean signal and strong driving capability
Contactless non-contact detection, vibration resistance and long service life
Compliant with RoHS environmental standard
5. Application Fields
TWS earbud cases, mobile phones, tablets, laptops: flip sensing, sleep wake-up, open/close detection
Smart wearables, electric toys, small home appliances: position sensing, limit switches
Smart door locks, electronic locks, valves: position and status detection
Water meters, gas meters, flow meters: flow counting and signal acquisition
IoT devices, wireless door contacts: battery-powered proximity switches
Industrial control, portable equipment: non-contact limit, counting and position sensing
6. Notes
Power Supply Filtering
A 1μF filter capacitor shall be connected in parallel close to the VDD pin between power supply and ground to suppress noise and prevent false triggering.
Voltage Specification
Operating voltage ranges from 1.8V to 5.5V with an absolute maximum rating of 6V. Reverse connection is prohibited, as the reverse withstand voltage is only -0.3V.
Omnipolar Characteristic
Output goes low when magnetic field > BOP; output goes high when magnetic field < BRP. It has no latching function and automatically resets once the magnetic field is removed.
Sensitive Surface
The top surface (marking side) of the SOT-23-3L package is the sensitive surface. The magnet shall approach perpendicularly to ensure magnetic flux lines pass through effectively.
Output Protection
The maximum output drive current is 5mA. Short-circuit of the output is strictly forbidden to avoid damage to the internal driver.
Power-on Validation
After the chip is powered on, the output becomes valid starting from the second operation cycle. Stabilization time shall be reserved.
Soldering and Environment
Follow SOT-23 soldering specifications and avoid prolonged high-temperature exposure. Keep the device away from strong magnetic fields, strong static electricity and high-humidity environments.
For additional technical support and product information, please contact the Slkor customer service team.