Products
Products
Products

SL1709Sx Hall Effect SensorTO-92S

Name: SL1709SL

Package: TO-92S

Packing: Tape and Reel

1. Product Overview
SL1709Sx is a low-power, omnipolar detection, slow-response Hall switch sensor packaged in a TO-92S through-hole package, designed for battery-powered and miniaturized smart devices. It features wide voltage range, wide operating temperature range and high anti-interference performance, suitable for scenarios such as low-speed sensing, position detection and flip wake-up.

2. Key Parameters
Sensing Polarity: Omnipolar (both N and S poles can trigger)
Operating Voltage: 1.8V–5.5V
Operating Current: 0.9μA @1.8V (25Hz)
Scan Frequency: 25Hz
Magnetic Threshold: 36Gs (low threshold)
Output Type: CMOS Push-Pull Output
Package: TO-92S
Operating Temperature: -40℃~+125℃
ESD: HBM 8KV

3. Product Advantages
Ultra-low power consumption for long standby time. With low-frequency scanning at 25Hz, the average operating current is only 0.9μA, ideal for long-standby battery-powered devices with strict power consumption requirements.
Omnipolar triggering for easier installation. It does not distinguish between N and S poles and can be triggered by either magnetic pole, lowering structural and assembly costs.
Microampere-level sleep with extremely low power draw. The sleep current is as low as 0.4μA, enabling ultra-long standby for battery-powered equipment.
Wide voltage and temperature range with high reliability. The 1.8V–5.5V wide voltage supports lithium batteries and MCUs; it meets industrial-grade wide temperature from -40℃ to 125℃ with 8KV ESD protection for robust stability.
Through-hole package for convenient assembly. The TO-92S through-hole package supports manual soldering and fits through-hole assembly production.
Stable output with minimal external components. CMOS push-pull output requires no external pull-up resistor, and only one 1μF filter capacitor is needed for stable operation.

4. Product Features
Omnipolar magnetic detection, responding to either N or S pole approaching
25Hz low-speed scan frequency focused on ultra-low power consumption
36Gs low magnetic threshold, sensitive to weak magnetic signals
Built-in temperature compensation and clock logic for stable threshold without drift
Intermittent sleep operating mode to achieve extreme low power consumption
CMOS push-pull output with clean signal and strong driving capability
Contactless non-contact detection, vibration-resistant with long service life
Compliant with RoHS environmental standards

5. Application Fields
TWS earbud cases, mobile phones, tablets, laptops: flip sensing, sleep/wake-up, open-close detection
Smart wearables, electric toys, small home appliances: low-speed position sensing, limit switches
Smart locks, electronic locks, valves: position and status detection
Water meters, gas meters, flow meters: flow counting and signal acquisition
IoT, wireless door contacts: long-standby proximity switches powered by batteries
Industrial control, portable devices: non-contact limit, counting and position sensing

6. Notes on Usage
Power Supply Filtering
A 1μF filter capacitor shall be connected in parallel between the power supply and ground, placed close to the VDD pin to suppress noise and prevent false triggering.
Voltage Specification
The operating voltage ranges from 1.8V to 5.5V with an absolute maximum rating of 6V. Reverse connection is prohibited, as the reverse withstand voltage is only -0.3V.
Omnipolar Characteristic
When magnetic field > BOP → output low; when magnetic field < BRP → output high. It has no latching function and resets automatically once the magnetic field is removed.
Sensitive Surface
The top surface of the TO-92S package is the sensitive surface. The magnet shall approach perpendicularly to ensure magnetic flux lines pass through effectively.
Output Protection
The maximum output drive current is 5mA. Short-circuiting the output is strictly forbidden to prevent damage to the internal driver.
Power-on Activation
After the chip is powered on, the output becomes valid starting from the second operation cycle. Stabilization time shall be reserved.
Soldering and Environment
Follow TO-92S soldering specifications and avoid prolonged high-temperature exposure. Keep the device away from strong magnetic fields, heavy static electricity and high-humidity environments.

For further technical support and product information, please contact the Slkor customer service team.
类型
Name
Title
Version
PDF
SL1709Sx
-
Datasheet
Support
whatsapp

Service Hotline

tel: +86 755 83044319

WhatsApp

Whatsapp:+8618073002950